2021 Mustang Track Loaders 2150RT

Swipe to View More

  • Year 2021
  • Make Mustang
  • Model Track Loaders
  • Engine 4TNV98C-NMSL

Please note that we may not have these catalogue items in stock

2021 Mustang Track Loaders 2150RT

2021 Mustang Track Loaders 2150RT

2021 Mustang Track Loaders 2150RT

Features may include:

Performance
  • Tier IV-certified Yanmar diesel engines provide 72 hp (53.7 kW)
  • Designed from the ground up, the welded chassis aids in superior weight distribution, which further enhances stability, grading, tractive effort and provides a smoother ride.
  • Flush rear door and angled rear towers provide tight rear clearance radius and excellent visibility.
  • Thick steel plating and heavy-duty pins and bushing strengthen the loader for extreme-duty work
  • Electronic engine control and foot throttle allow operation at partial throttle, reducing sound levels and fuel consumption.
Operator's Cab
  • Pilot controls provides the operator true 1:1 proportional control over the drive system.
  • All-New seat-mounted pilot control system - redesigned cab mount the controls to the seat, providing added leg room and less arm fatigue during operation.
  • Hydraloc™system applies the parking brake whenever the operator raises the restraint bars, leaves the operator's seat, open the door or switches off the ignition.
  • Standard, selectable 2-speed drive motors, horn and backup alarm.
  • Multi-purpose LCD display provides easy readout during operation.
  • Single button allows simple scrolling and selection of various display functions.
Controls
  • Cab forward design enhances the view to the bucket.
  • Level II FOPS is standard equipment.
  • New, side-folding restraint bars and armrests with multiple adjustments enhance operator safety and comfort.
  • Complicated gauges and cluttered dash readouts are eliminated with a customizable, easy-to-use multi-function display that incorporates all warning/operation lights and machine configuration screens.
Engine
  • Automatic glow module engine intake heating system provides superior cold-weather starting.
  • Engine warranty, parts and service are handled through dealership servicing in conjunction with Mustang parts and service support.
Hydraulics
  • New cast-iron pump design delivers efficient flow at higher temperatures.
  • Lift cylinders incorporate cushioning for smoother operation when lowering the lift arm.
  • Electro-hydraulic controlled hydrostatic transmission with direct engine coupling provides high operating efficiency while AntiStall technology keeps the power flowing.
  • Power track drive motors deliver superior pushing power.
  • Auxiliary hydraulic quick couplers easily connect under pressure for fast, efficient attachment changes.
Lift Arm
  • Additional reach and increased dump height result in more efficient load placement and overall performance.
  • Low-profile design provides outstanding forward, rear and side visibility.
  • Simple "in-line" design increases structural integrity by eliminating the complex geometry and welding found on many competitive "offset" lift arm designs.
  • Front channel support and large diameter pivot pins provide exceptional lateral strength and rigidity.
  • Lift-arm incorporates dual bucket cylinders and two lift-arm stop blocks on the front of the main frame to evenly distribute digging forces.
Serviceability
  • Large, gas-spring assisted engine cover and over-sized, flush-mounted rear door allows full access on the rear of the machine for servicing and maintenance.
  • Lockable compartments on the rear towers open to reveal the battery on the left and hydraulic tank on the right.

Engine

Engine Manufacturer Yanmar
Engine 4TNV98C-NMSL
Engine Type 4-Stroke Turbo
Engine Power Net @ 2500 rpm: 72 hp (53.7 kW)
Engine Torque Peak @ 1600 rpm: 217 ft.-lbs. (294 Nm)
Displacement 202 cu.in. (3.3 l)
Emissions Tier IV
Cylinder Liners 4

Drivetrain

Transmission Axial Piston

Electric

Alternator Voltage/Amperage: 14V/100A

Operational

Operating Conditions Bucket Breakout - Tilt Cylinder: 6,631 lbs. (3008 kg) | Bucket Breakout - Lift Cylinder: 6,481 lbs. (2940 kg) | Dump Angle - Fully Raised: 39° | Pull / Tractive Effort: 12,133 lbs. (5503 kN)
Operating Speed Ground Speed - Single Speed: 5.9 mph (9.5 km/hr) | Ground Speed - Two Speed: 8.8 mph (14.2 km/hr)
Ground Pressure 4.8 psi (0.33 bar)

Hydraulics

Hydraulic Flow Auxiliary: 21.8 gpm (82.5 l/min) | High-Flow: 35.9 gpm (135.8 l/min)

Dimensions

Overall Height Operating - Fully Raised: 168" (4267 mm) | Height at ROPS: 83.1" (2111 mm)
Dimensions Reach - Fully Raised: | Carry Position: 8.2" (208 mm) | Track Gauge: 51.7" (1313 mm) | Crawler Base: 58.4" (1483 mm)
Overall Length With Bucket - Standard Counterweight: 148.4" (3769 mm) | Without Bucket - Standard Counterweight: 116.5" (2959 mm)
Overall Width Less Bucket: 69.5" (1765 mm)
Height To Hinge Pin - Fully Raised: 128" (3251 mm) | Dump - Fully Raised: 98" (2489 mm) | Specified: 67.7" (1720 mm)
Width Bucket: 73.9" (1877 mm)
Ground Clearance 12.6" (320 mm)
Track Width 17.7" (450 mm)

Capacities

Cargo Capacity At 35% of Tipping Load: 2,150 lbs. (975 kg) | At 50% of Tipping Load: 3,072 lbs. (1393 kg) | Tipping Load: 6,144 lbs. (2787 kg)
Hydraulic Capacity Reservoir Tank: 13.8 gal. (52.2 l)
Fuel Capacity Tank: 24 gal. (91 l)
Oil capacity Pump: 11 qts. (10.4 l)
Cooling System 3.8 gal. (14.4 l)

Weights

Weight, In Running Order 9,000 lbs. (4491 kg)

Features

Features Roller Type: Steel
Track Type Rubber | Rollers: 5

Product Photography